Designer Metal 100mm 4" dia

Extractor Fans | Extractor Fans | Utility Room Extractor Fans | Designer Brushed Metal Utility Room Extractor Fan |  Designer Metal 100mm 4" dia


Designer Metal Utility Room Extractor Fan 4
View Larger Images

Designer Metal Utility Room Extractor Fan 4" dia

Bookmark and Share

Ref: UT-LXA3-100

From: 31.14 (Incl. VAT @ 20%)

Select A Quantity:

Control Options
No Controls 31.14
Timer 35.51
Pull Cord 33.05
Humidity/Timer 42.35


Our Designer Utility Room Extractor Fan will suit any modern contemporary utility room or anywhere where a great look is desired. The extractor fan is finished with a high quality brushed aluminium front that will complement any room.

  • Up to 88 M3/h Airflow Rate.
  • Designer contemporary look, low profile and slimline.
  • 14w Energy consumption.
  • Finished in brushed aluminium.
  • Backdraught shutter included.



Designer Utility Room Extractor fans will suit any utility room where a fresh look is desired. The LXA3 Series Utility Room Extractor has a designer look and feel and would blend into any contemporary utility room. Finished in in brushed aluminium metal with a good airflow rate, noise level and efficiency.

  • Contemporary look and design.
  • Finished in brushed aluminium metal.
  • Membrane, butterfly wing action shutter fitted as standard.
  • Great range of control options.
  • Retrofit into existing 100mm, 4" circular aperture.



Airflow Rate
The airflow rate of a fan, is the amount of air it can move, over a given period of time. Confusingly, this can be quoted in three different measurements so for ease, we have included all three.

This fan has an airflow extract rate of:
  • 88 m3/h (metres cubed per hour).
  • 24 l/s (litres per second).
  • 51 cfm (cubic feet per minute).

Electrical Load
This fans electrical requirements are as follows:

  • 220-240 Vac 50/60Hz UK & European Mains AC Voltage.
  • 14 Watts.
  • 0.085 Amps.

Sound
This fan has a noise level of 33 dB(A) @ 3m distance from the fan.

Insulation
This fan has in IP rating of IPX4. This means the fan is protected from splashes of water.


No Controls

Connect to your own method of control ie, separate pull cord, switch, humidity sensor or simply to a plug.

Run-on Timer

Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins.

Pull Cord

Simply be operated by its own built-in pull cord.

Humidity Sensor & Timer

Will switch on when your room gets humid. Adjustable from 60 to 90%

Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins.

Butterfly Wing Action Shutter

Fitted on the back of the fan to stop backdraught.



No Controls

Live connection from your light switch, pull cord or seperate control to L. Perminent Neutral connection to N.

Run-on Timer

Perminent Live connection to L & Neutral connection to N.

Pull Cord

Perminent live connection to L. Switched live to LT and perminent neutral to N.

Timer is adjusted inside the fan.

Humidity Sensor & Timer

Perminent live connection to L. Switched live to LT and perminent neutral to N.

Timer & humidity is adjusted inside the fan.




 



Go Back

 
Fantronix Limited Useful Links