Toilet Extractor Fans - Silent

Extractor Fans | Extractor Fans | Toilet/Cloak Extractor Fans |  Toilet Extractor Fans - Silent


Silent Kitchen Extractor Fans

Silenta Series Kitchen Extractor Fans available in 100mm (4"), 125mm (5") & 150mm (6") sizes are, in our opinion, the best room mounted axial fans on the market, and here's why...

Virtually silent running with Silent-Blocks

Virtually silent running with Silent-Blocks

Most fan noise is created by the fan motor its self. The silenta fan motor is 30% quieter than standard fans. Normally, in extractor fans, the vibrations are transmitted to the surrounding areas, while in silenta extractor fans the vibrations are absorbed within the motor casing, thus insuring virtually silent operation.

Long life, low energy motors

Long life, low energy motors

All silenta kitchen extractor fans are fitted with "sealed for life" ball bearing motors, which guarantee long life operation (over 30,000 hours). That's almost 25% longer than most extractor fans.

Silenta extractor fans are also fitted with 230 V-50 Hz, class B low power consumption motors, down to 5.5w for the SILENT-100 Series.

Back draught shutters fitted as standard

Back draught shutters fitted as standard

Long gone are the ugly, slow opening shutters normally placed at the front of an extractor fan. The Silenta range has 'butterfly wing' effect shutters fitted out of the way at the back of the fan. The shutter is operated by the pressure of the air when the fan is switched on and gently closes to prevent air entry and heat leakage from the room. As the shutter is lightweight, it has very little effect on the fans performance, thus maintaining high efficiency.

Run-on timer option

Run-on timer option

This option is provided with a run-on timer. The timer allows the fan to continue for the selected period of time after the switch has been turned off. The over-run time is adjustable inside the fan and can be set to meet the room's environment.

Humidity sensor option

Humidity sensor option

This option has a built-in electronic humidity sensor. This allows the fan to operate when the room environment reaches a preset level of humidity. This feature allows the humidity level to be adjusted inside the fan from 60 to 90% RH (relative humidity).

This option is also provided with a run-on timer. The timer allows the fan to continue for the selected period of time after the switch has been turned off.

Pull Cord Operation

Pull Cord Operation

This option has a built in pull cord. This allows basic on/off operation directly from the fan.

Motion detector option

Motion detector option

This motion sensing option uses a PIR (passive infra-red detector). The silent extractor fan starts when warm movement is detected within a maximum distance of 4 metres from the fan. This option offers total automatic operation. The fan can be pre-set to continue to run for up to 30 minutes after you have left the room.

 
Fantronix Limited Useful Links