Silavent MVHR Controls

Extractor Fans | Heat Recovery Ventilation | Polypipe Silavent HRX2 Greenline MVHR Unit |  Silavent MVHR Controls


Silavent Green Line HRX MVHR Controls
View Larger Images

Silavent Green Line HRX MVHR Controls

Bookmark and Share

Ref: HRX-CONTROLS

From: 67.51 (Incl. VAT @ 20%)

Select A Quantity:

Choose you HRX Controls
Choose you HRX Controls
Timer 67.51
Timer & Humidity 141.53
Timer, Humidity & Pull Cord 132.78
Duct Timer & Humidity Sensor 157.30
Timer & PIR Detector 150.27
Controls Extention Junction Box 45.01




ANC108A - Over-run timer

Suitable for both HRX and HRX 2 Units.

An adjustable overrun timer that allows the boost speed to remain for a set amount of time after the low speed switch has been selected.

The overrun is selectable from between 1 and 25 minutes to suit your needs.

ANC802A- Humidistat with Over-run Timer

Suitable for both HRX and HRX 2 Units.

A humidity controller that detects the level of humidity in your wet room and boosts the unit. Humidity thresholds are adjustable to suit your environment.

The overrun timer allows the boost speed to remain for a set amount of time after the humidity level has been sufficiently reduced.

The overrun is selectable from between 1 and 25 minutes to suit your needs. One unit is required for each room in which you wish to measure humidity.

ANC808A- Humidistat with Over-run Timer and Pull cord

Suitable for both HRX and HRX 2 Units.

A humidity controller that detects the level of humidity in your wet room and boosts the unit. Humidity thresholds are adjustable to suit your environment.

The overrun timer allows the boost speed to remain for a set amount of time after the humidity level has been sufficiently reduced.

The overrun is selectable from between 1 and 25 minutes to suit your needs.

Fitted with a pull cord for manual override at any time.

One unit is required for each room in which you wish to measure humidity.

ANC-846A Duct Mounted Humidistat with Over-run Timer

Suitable for both HRX and HRX 2 Units.

A duct mounted humidity controller that detects the level of humidity in your extract ducting and boosts the unit. Humidity thresholds are adjustable to suit your system.

The overrun timer allows the boost speed to remain for a set amount of time after the humidity level has been sufficiently reduced.

The overrun is selectable from between 1 and 25 minutes to suit your needs.

As this unit detects the moisture in the extract section of the system, only one is needed per system.

ANC-813A P.I.R. Movement Sensor with Over-run Timer

Suitable for both HRX and HRX 2 Units.

A passive infrared movement sensor that detects movement through body heat and triggers the boost function on your unit.

The overrun timer allows the boost speed to remain for a set amount of time after movement has ceased to be detected.

The overrun is selectable from between 1 and 25 minutes to suit your needs.

One unit is required for each room in which you wish to sense movement.

ELE-150R Back-feed Prevention Junction Box

Suitable for both HRX and HRX 2 Units.

A six switched live back feed-protected junction box.

This unit prevents electrical back feed through the lighting circuit when more than three light switches are used as boost triggers.


Go Back

 
Fantronix Limited Useful Links