Passive Stack Roof Ridge Vent

Extractor Fans | Duct Grilles, Ceiling Vents & Wall Shutters |  Passive Stack Roof Ridge Vent


Passive Stack Roof Ridge Vent Terminal
View Larger Images

Passive Stack Roof Ridge Vent Terminal

Bookmark and Share

Ref: PS-STF

From: 110.71 (Incl. VAT @ 20%)

Select A Quantity:

Select Your End Caps
No end caps 110.71
Redland Pitched End Caps 138.99
Redland Round End Caps 138.99
Marley Pitched End Caps 138.99
Marley Round End Caps 138.99
Russell Pitched End Caps 138.99
Russell Round End Caps 138.99


  • Especially designed for Passive Stack Ventilation.
  • Integrated into the roof ridge.
  • Uses the original tiles.
  • Adapted to various roof slopes.
  • Free area to match Passive Stack Ventilation (PSV) requirements.
  • Protective grille against birds and insects.



 
Naturally effective extraction

Perfectly integrated into the houses roof ridge, the STF Ridge Vent is adapted to main types of ridge tiles. It exhausts the air extracted from the Humidity Controlled Grilles while protecting the inside structure against insects.

Specially designed and manufactured for the British market, it is part of an effective and easy to install Passive Stack Ventilation (PSV) system for houses.

Specific End Caps adapted to main roof tiles (2) Six types of End Caps allow adapting and connecting the ridge vent to the main roof tiles on the British market. The End Caps takes the shape of the roof ridge tiles for a simple installation and the best design integration.

  • Especially designed for Passive Stack Ventilation.
  • Universal ridge vent.
  • Integrated into the roof ridge.
  • Uses the original tiles.
  • Adapted to various roof slopes.
  • Free area to match Passive Stack Ventilation (PSV) requirements.
  • Protective grille against birds and insects.


 


Ridge Vent Operation

The Aereco Passive Stack Ridge Vent aides the passive stack effect by allowing atmospheric outdoor air to pass over the terminal and draw extract air from the house.



Airflow characteristics

Will achieve up to 250 m3/hour (69 l/second) @ 13 Pa



 

The system has been tested, and it complies with the specific requirements of the British Standards EN1859:2000 Resistance against rainwater (clause 4.92), and EN1846-1:2003 Performance when subject to wind resistance (Annex NA.6). In achieving these standards, the terminal protects from internal accumulation of rainwater, and gives low resistance air passage, which aids in the effectiveness of Passive Stack ventilation.
  • Weight: 1.6Kg.
  • Colour: Black.
  • Duct connection: 125mm Dia.
  • Free area: 16000 mm2.
  • Adapted to various roof slopes.
  • Free area to match Passive Stack Ventilation (PSV) requirements.
  • Protective grille against birds and insects.


Ridge Vent End Caps

The End Caps allow connecting the ridge vent to the tiles on each side of the STF; they also ensure the correct fitting of the tile covering the ridge vent.

Six types of End Caps with Ridge Tile connector are available to match in with the relevant ridge system.



 


 


Go Back

 
Fantronix Limited Useful Links