Domus Radial Duct Manifold - Flat Duct

Extractor Fans | Heat Recovery Ventilation | Polypipe Silavent HRX2 Greenline MVHR Unit | Domus Radial Duct Products & Fittings |  Domus Radial Duct Manifold - Flat Duct


Domus Radial Duct Manifold - Flat Duct
View Larger Images

Domus Radial Duct Manifold - Flat Duct

Bookmark and Share

Ref: RDM-MD220

From: 159.99 (Incl. VAT @ 20%)

Select A Quantity:

  • Additional or replacement maniold when using flat ducting 220x90 ducting.
  • Combines with Silavent 75mm semi rigid ducting.
  • Slim profile, only 125mm deep.
  • 220x90mm dia side mounted flat duct spigot
  • 9 potential duct outputs for input or extract air.
  • Offers an improved airflow over traditional MVHR ducting methods.
  • Use as part of your heat recovery ventilation system.
  • Ducring shown in picture is not included.




The manifold is used in a Domus Radial Duct System to provide additions duct branches or as a replacement unit. 220x90mm flat duct connects to the side of the unit and allows up to 9 distribution points to be connected to it. 75mm Domus Radial Duct is used to clip and connect from the manifold. to specail radial grille plenums. Generally two manifold are needed per MVHR System; one for extract air froms your kitchen and wet rooms and one for intake air for supplying air to your living rooms.

The manifold is a specialised component used as a central distribution system. It distributes the air from a Centralised MEV or Heat Recovery unit instead of adjacent to room entry as in a traditional branch system.

It has a single inlet spigot with the option of up to 12 evenly spread distribution points making it particularly suitable for larger properties and multi-room applications. With inherent insulation and sound attenuation properties, this also helps prevent condensation and limit the escape of heat and noise, reducing the requirement for duct silencers.

  • Offers an improved airflow over traditional MVHR ducting methods.
  • Combines with Silavent 75mm semi rigid ducting.
  • 220x90mm deep for installation between joists or in tight spaces; making the location/its positioning very flexible.
  • Option to integrate round and rectangular rigid ducting.
  • Compact new manifold size allows for greater location flexibility and can integrate with Domus rigid duct systems to create versatile hybrid solutions .
  • For use with Silavent MVHR and MEV units.
  • 9 potential duct outputs for input or extract air.
  • Ducring shown in picture is not included.



The Domus Duct & Plenum is an integral part of Radial Duct System. It is designed to only work with Radial Duct parts and should not be fitted with any product outside of this range.

After you have connected the duct pack from your MVHR unit to the plenum box, the radial duct is very easy to connect. Take out a redundant blanking plate, insert the radial duct and clip in. Repeat this for all extract and supply air grilles taking care to run the radial duct with limited bends and without any sharp turns.



Go Back

 
Fantronix Limited Useful Links