Domus Radial Manifold Flat Duct Kit - HRX2

Extractor Fans | Heat Recovery Ventilation | Polypipe Silavent HRX2 Greenline MVHR Unit |  Domus Radial Manifold Flat Duct Kit - HRX2


Domus Radial Manifold Flat Duct Kit - HRX2
View Larger Images

Domus Radial Manifold Flat Duct Kit - HRX2

Bookmark and Share

Ref: RADIAL-FLAT-KIT-HRX2

From: 799.99 (Incl. VAT @ 20%)

Select A Quantity:

  • Save up to 60% installation time with a Domus Radial System.
  • Suitable for Domus Mega Duct or any 220x90mm flat ducting.
  • Part of the DIY Domus Radial Duct System.
  • Kit consists of supply & extract manifolds, duct, clips and wall grilles.
  • DIY push fit-and-clip radial duct.
  • 100m of 75mm dia. radial duct included.
  • Additional items available such as silencers, bends and condensation traps.
  • Simply choose your MVHR unit and grill kits to complete your installation.
  • Designed specifically for MVHR systems.




The Domus Radial Duct System is a true DIY system that any builder, electrician, plumber or keen DIY'er can fit. Simply choose your MVHR heat recovery unit, this manifold and duct kit, along with your ceiling grille kits.

  • Save up to 60% installation time with a Domus Radial System.
  • Suitable for Domus Mega Duct or any 220x90mm flat ducting.
  • Part of the DIY Domus Radial Duct System.
  • Kit consists of supply & extract manifolds, duct, clips and wall grilles.
  • DIY push fit-and-clip radial duct.
  • 100m of 75mm dia. radial duct included.
  • Additional items available such as silencers, bends and condensation traps.
  • Simply choose your MVHR unit and grill kits to complete your installation.
  • Designed specifically for MVHR systems.



The Domus Duct & Manifold Kit is an integral part of Radial Duct System. It is designed to only work with Radial Duct parts and should not be fitted with any product outside of this range.

Two manifold boxes are provided, one for extract air and one for supply air. After you have connected the duct pack from your MVHR unit to the manifold box, the radial duct is very easy to connect. Take out a redundant blanking plate, insert the radial duct and clip in. Repeat this for all extract and supply air grilles taking care to run the radial duct with limited bends and without any sharp turns.



For grille plenum kit connections, simply follow the same process as above.



Here is a list of items that are included in the kit:

  • 100m (2x50m rolls) 75mm Radial Duct.
  • 80 Radial Duct clips 75mm (approx. 1 per 1.5m).
  • Two duct manifold boxes for your supply and extract air. This will give you up to 9 extract or 9 supply air points.
  • Manifold clips and blanking plates.
  • 3m of 150mm (6") dia solid plastic ducting.
  • 150mm (6") dia 90 degree bends (x2).
  • MVHR unit 150mm (6") dia duct connections 350mm long (x4).
  • Circular to rectangular duct 90 deg. adaptors (x2).
  • 11m of Domus Megaduct 220x90mm solid plastic flat duct and couplers.
  • External wall grilles (x2).
  • Duct tape.
  • Flat duct vertical bends 90 degree (x4).

Items you will need to complete the grille kit installation:

  • Sealant for sealing solid duct connections.
  • Thermal insulation for loft mounted duct.
  • Flat blade screwdriver.


Go Back

 
Fantronix Limited Useful Links