Blauberg Calm Fan White 100mm

Extractor Fans | Extractor Fans | Bathroom Extractor Fans | Calm Bathroom Extractor Fans |  Blauberg Calm Fan White 100mm


Blauberg calm quiet silent extractor fan 100mm white
View Larger Images

Blauberg calm quiet silent extractor fan 100mm white

Bookmark and Share

Ref: 100-CALM-WHI

From: 41.38 (Incl. VAT @ 20%)

Select A Quantity:

Select Your Control Option
Standard 41.38
Timer 48.97
Pull Cord 44.83
Timer & Pull Cord 52.42
Humidity Sensor 55.18
PIR Detector 68.97


  • Contemporary designer bathroom fan finished in white gloss.
  • Unprecedented synergy between high airflow, low noise and energy consumption.
  • German engineered design with noise dampening features.
  • Full range of control options.
  • Long life Blauberg ball bearing motor.
  • Fitted with an anti-back draught shutter.



 
Brand new contemporary extractor fans that will suit any modern bathroom, kitchen, wet room or en-suite. Fitted with German engineered features to bring you higher levels of airflow without additional noise.

The Blauberg Calm range is also available in a range of colours to meet the needs of modern design, while retaining classic elements when fitting in retro rooms and buildings.

A full range of control options are available from a simple pull cord to an automatic PIR sensor.

  • Up to 97 m3/hour (27 l/s) airflow rate.
  • 100mm (4") round duct connection.
  • 240v ball bearing motor suitable for outside bathroom zones 1 & 2.
  • Low noise, only 25 dB(A).
  • Contemporary design finished in UV protected white gloss.
  • Only 7.5w energy consumption.
  • Insulated against condensation to IP45.

 


 

Airflow Rate
This fan has an airflow extract rate of up to:
  • 97 m3/h (metres cubed per hour).
  • 27 l/s (litres per second).
  • 57 cfm (cubic feet per minute).

Electrical Load
This fans electrical requirements are as follows:

  • 240 Vac 50/60Hz.
  • Only 7.5 watts
  • 0.73 Amps.

Sound
This fan has a noise level of 25 dB(A) @ 3m distance from the fan.

Insulation
This fan has in IP rating of IP45. This means the fan is protected against solid foreign objects of 1,0 mm diameter and against water projected in jets from any direction

 

Standard

Connect to your own method of control ie, separate pull cord, switch, humidity sensor or simply to a plug.

Run-on Timer

Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins.

Pull Cord

Simply operated by its own built-in pull cord.

Humidity Sensor & Timer

Will switch on when your room gets humid. Adjustable from 60 to 90%

Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins.

Timer & Pull Cord

Will switch on when you use the pull cord.

Will continue to function after you have turned off your pull cord switch. Adjustable from 2 to 30 mins.

Movement Detector

Will switch on when you enter the room. Will detect your movement from 1 to 4m away, at a 100 degree angle.

Will continue to function after you have turned off your switch. Adjustable from 2 to 30 mins.




 

Standard

Live connection from your light switch, pull cord or seperate control to L. Permanent Neutral connection to N.

Run-on Timer

Permanent live connection to L. Switched live to LT and permanent neutral to N.

Timer is adjusted inside the fan.

Pull Cord

Permanent Live connection to L & Neutral connection to N.

Humidity Sensor & Timer

Permanent live connection to L. Switched live to LT and permanent neutral to N.

Timer & humidity is adjusted inside the fan.

Pull Cord & Timer

Permanent Live connection to L & Neutral connection to N.

Timer is adjusted inside the fan.

Movement Detector

Permanent Live connection to L & Neutral connection to N.

Timer is adjusted inside the fan.



 

 


Go Back

 
Fantronix Limited Useful Links